WellCAD Basics - Advanced Logic Technology

288 - APPENDIX A
www.alt.lu
When displayed as Top the actual depth, name and comment of the marker will be
displayed on three different lines – depth on top of the chosen marker line style and
name and comment below.
When the Surface style has been chosen, the actual depth and name of the marker
will be display on top of the selected marker line. The comment will be displayed
below.
Displaying the data in Marker style shows the actual depth and Name on the depth.
No marker line will be displayed. Users who want an easy way to put depth
referenced remarks on a log column might prefer this display style.
The horizontal position of the text can be chosen from the Text Alignment drop
down box. Possible options are Left, Center and Right.
If the text of adjacent markers would overlap, the lower marker will be shifted down
displaying a line (pinch) pointing to the correct depth. By selecting one of the
options provided in the Pinches drop down box the position of the pinches can be
set. If None is selected no pinches will be displayed but overlapping markers will
not be shifted either.
Display Options:
The user can select which of the three marker details – actual depth (derived from
actual depth scale), name or comment – is displayed, by checking the corresponding
option. Further the font style for each of the details can be set independently.
Contact Dictionary:
When the Style has been set to Top or Surface a line will be displayed at the markers
depth. The line style can be pre-defined and stored in Contact Dictionaries (see 1.5.3
Using Contact Styles).