WellCAD Basics - Advanced Logic Technology

APPENDIX A - 385
The Analysis Components list shows a field for each data channel in your log.
Select the one for which you want to define the display pattern. Simply click into the
corresponding cell in the list. Click on the Modify button next and select a pattern
from the library. Continue until all components have a pattern assigned.
If you want to add a component to your log, click the Add button and modify the
new entry. Clicking the Remove button allows to delete a component. Note:
Existing data will not change when adding or removing components. New
components will be inserted with a default value of 0%.
Editing Methods:
You can edit the data values of the Percentage Log in the Tabular Editor (see
1.3.2.14 The Tabular Editor). If you prefer inserting data interactively using the
mouse the Percentage Log offers different methods depending on the display style
chosen.
Inserting Data Points:
� Select the log you want to edit.
� Move your mouse pointer to the depth you want to insert a new data point.
See the Status Bar displaying the mouse coordinates.
� Press the Shift key and click to insert a new bar or data point. If you display
the data in Line style you will need to insert two data points at the very
beginning to see the data (line between two points).
Data points can be inserted anywhere in the log column.
Deleting Data Points:
� Select the log and press the CTRL key.
� Click on the data point you would like to remove.
Editing Data In Dynamic Or Fixed Bar Style:
To edit the percentage value of each component
� Select the log.
� Move your cursor to the border between two components. The mouse
pointer is displayed as a double-sided horizontal arrow now.