WellCAD Basics - Advanced Logic Technology

1.3.2.13 Comparing Log Data – The Tracking Bar
BOOK 1 - WELLCAD BASICS - 57
The Tracking Bar is a tool to view and compare data values of multiple logs
originating from the same depth in a window floating on top of the borehole
document. As the mouse cursor is moved along the borehole document the actual
depth position will be determined and used to refresh the values displayed in the
Tracking Bar.
Tracking Bar showing values of multiple Logs at cursor depth
The Tracking Bar can easily be displayed by pressing the key combination CTRL+9
or selecting the Tracking Bar entry from the View > Toolbars menu. If you select
the log titles before the box will already be filled with your selection.
The bar is docked to the bottom of the borehole document by default. If you wish
to make it floating on top of your borehole document simply drag or double click
the left or right border to undock the bar. If you wish to have it docked again simply
double click on the frame of the window.
Adding a log:
The easiest way to add logs to the Tracking Bar is having the logs selected prior to
calling up the bar (i.e. select one or multiple logs and press CTRL+9).
If you wish to add a log to an existing display simply click into the next free cell in
the Log column in order to display a drop down list with all log titles available.
To change to another log simple click in the corresponding cell in the Log column
and pick a new log title.
Removing one or multiple logs:
To remove a single log from the list select the row and hit the Delete key.
To clear the entire list right click into the list and select Remove all logs.