WellCAD Basics - Advanced Logic Technology

364 - APPENDIX A
www.alt.lu
Inserting a new RGB Log:
RGB Logs are automatically generated when files are imported. RGB Logs are also
created as result of the conversion from Image Logs to RGB Logs.
Main Settings:
Title:
RGB Log Settings dialog box
Enter the title that identifies the log. The title will be displayed in the Title area of
the log handle.
Position:
You can set the left and right position of the log column in selected units. The
default unit displayed is the one set for the Ruler Bar (see 1.3.2.4 Positioning Logs).
Reference:
Usually the left hand side of the log track is used as reference (e.g. as 0°, High Side
or North) and is the position of the first data point that is drawn. To reverse the
data display and have the reference of the right hand side of the log track, check the
Reverse option.
Editing Methods:
The data values of an RGB log can be edited using the Tabular Editor only. Direct
interactive data edition tools are not supported.