WellCAD Basics - Advanced Logic Technology

394 - APPENDIX A
www.alt.lu
Aperture Units:
Select the units in which the aperture will be measured and stored as data. Possible
options are [mm] and [in/10]. Please note that the apparent aperture will be
displayed on screen while the true aperture will be recorded as data.
Pen Width:
To enhance the visibility of the sinus curves on screen or print out, select an
appropriate thickness for the lines drawn. This parameter has no influence on the
structure ranking and is not recorded as such.
Position:
You can set the left and right position of the log column in selected units. The
default unit displayed is the one set for the Ruler Bar (see 1.3.2.4 Positioning Logs).
Style:
Select whether you want to display your data in Projection, Tadpole and Slab Core
style. For interactive picking of structural events the Projection style offering the
ability to fit a sine curve interactively might be the best choice. For interpretation
purposes the Tadpole or Slab Core styles offer a better overview.