WellCAD Basics - Advanced Logic Technology

Inserting A New 3D Log:
APPENDIX A - 439
A 3D log can only be created using the Insert New Log option from the Edit
menu. The 3D Log Components dialog box will be displayed.
The appearance of the 3D borehole cylinder is a combination of geometric and
color information. The shape of the cylinder is derived from the data provided as
the Caliper component. The cylinder surface color is defined through the
Amplitude component.
Select the log to be used as the Caliper component of the 3D log from the Caliper
drop down list. The combo box is pre-filled with possible choices. These are None,
which means that the cylinder radius will be constant, and all Well Logs, Formula
Logs and Image Logs present in the borehole document.
Select the log that will be used as the Amplitude component of the 3D log from the
drop down list. The combo box is pre-filled with possible choices. These are None,
which means that the cylinder surface color will be constant, or Well Logs, Formula
Logs and Image Logs present in the borehole document.