WellCAD Basics - Advanced Logic Technology

416 - APPENDIX A
www.alt.lu
Auto set per taxon:
By choosing this option the count rate scale is set for each column automatically
according to minimum and maximum found in the column.
Auto set per sample:
By choosing this option the count rate scale is set for each row in the Tabular editor
(depth sample). The scale high corresponds to the maximum value of the data row
the low value is set to zero.
Auto set global:
The maximum count rate of all data values is determined and set as scale high value
while the low value is set to zero.
Using the Mode drop down list you can toggle between logarithmic and linear
display style of your data.
If you check the Reverse option you will reverse the scale. Low values will be on
the left, right value on the right side of each taxon column. The normal orientation
is with the low attached to the left hand side of the column and the high attached to
the right hand side.
Grid:
You can group taxons using a vertical grid line as separator between groups. Enter a
number into the Grid edit box and check the Display Grids option. The number
you have entered corresponds to the amount of taxon names per group.
Example of grid application in Bio Log