WellCAD Basics - Advanced Logic Technology

334 - APPENDIX A
www.alt.lu
Cut:
Copies the data to the clipboard and removes the data set from the borehole
document.
Copy:
Copies the data set to the clipboard so that it can be pasted into a borehole
document or an application like MS Excel.
Clear Contents:
Erases all data without removing the log from the document.
Delete:
Removes the log and its data from the borehole document.
Slice at:
Splits the data set into upper and lower part.
Shift by:
Performs a constant depth shift of the entire data set.
Conversion to other log types:
The Stacking Pattern Log can be converted to Well, Mud, Comment and Lithology
Log.
Stacking Pattern Log to Well Log:
When converting a Stacking Pattern Log to a Well Log the user has to specify a
sampling rate first. Afterwards a new Well Log will be created containing
interpolated top and bottom width data from the stacking pattern intervals. Please
note that the values will be output in percent (e.g. 0.1 becomes 100).
Stacking pattern Log to Mud Log:
When converting a Stacking Pattern Log into a Mud Log each top and bottom
depth value of the stacking pattern interval will become a data point of the new Mud
Log. Please note that the data values will be output in percent (e.g. 0.1 becomes
100).
Stacking pattern Log to Comment Log:
Converting a Stacking Pattern Log into a Comment Log results in a text box for
each stacking pattern interval. A description of the symbol is given as well as the
data values at top and bottom of the interval in percent.