WellCAD Basics - Advanced Logic Technology

74 - BOOK 1 - WELLCAD BASICS
www.alt.lu
Position:
The depth axis column can be moved, positioned and resized the same way a log can
be. Enter numbers for the Left and Right position of the column border in selected
units.
Date / Time:
The Date / Time Format Settings dialog box is accessible only if the selected
Unit is set to date/time. It provides further settings to control the display format
of date and time stamps.
Date / Time Format Settings dialog box
Date:
From the Format drop down list select the desired format for your date strings. If
you want to display a date stamp every 12 hours you should enter a value of 720 in
to the corresponding edit box.
Time:
Select the desired format for your time strings from the Format drop down list.
GMT offset:
To display your data corrected for a certain GMT offset enter the required value in
the corresponding edit box. If the data stored corresponds to 6 a.m. GMT and you
want to display a data/time string in GMT+1 enter a value of 60.
Time Zero:
If date/time data is handled in a Depth Log the data values stored correspond to
seconds. You can use the Time Zero to define the initial date and time of your data
column. E.g. the progress in depth during a drilling operation is monitored. For each