WellCAD Basics - Advanced Logic Technology

408 - APPENDIX A
www.alt.lu
Length Units:
Select the units in which the length of a breakout will be measured and stored as
data. Possible options are [mm], [cm], [m], [ft], [in] and [in/10]. Please note that the
apparent aperture will be displayed on screen while the true aperture will be
recorded as data.
The length of a breakout is the length parallel to the borehole axis
Pen Width:
To enhance the visibility of the lines on screen or print out, select an appropriate
thickness for the lines drawn. This parameter has no influence on the breakout
ranking and is not recorded as such.
Position:
You can set the left and right position of the log column in selected units. The
default unit displayed is the one set for the Ruler Bar (see 1.3.2.4 Positioning Logs).
Style:
Select whether you want to display your data in Projection or Symbol style. For
interactive picking of breakouts the Projection style offering the ability to fit a line
or box interactively might be the best choice. For interpretation purposes the
Symbol style offers a better overview.
Caliper button:
Click the Caliper button to access a dialog box with detailed settings important for
the correct acquisition of breakout data.