WellCAD Basics - Advanced Logic Technology

1.8.2.2 Log Overview
Axis Settings
BOOK 1 - WELLCAD BASICS - 211
Axis Settings dialog box
The Axis Settings dialog box allows setting the axis Title and adjustment of the
min and max scale values. A Reversed Axis displays the labels ascending from the
right to the left (respectively from the top to the bottom).To change the layout of
the Grid click the Settings button.
The fonts for axis labels and axis title can be changed using the options accessible
through the Title Font and Label Font buttons.
Please note: Axis titles are not automatically updated if the components (logs)
specified in the Chart Settings change.
A chart can be further equipped with a single chart title (Edit > Add Title), legends
providing information about plotted components (Edit > Add Plot Legend) and
data clusters (Edit > Add Cluster Legend) and Annotations (pick the tools from
the Annotation Bar). Details about the chart layout are given in.
The logs overview is a tool bar attached to the cross-plot chart and can be toggled
on/off using View > Toolbars > Logs Bar or simply using the shortcut CTRL
+ 9.
The Logs Bar shows all the logs selected as X,Y, Color and Symbol component. If
data clusters have been created a Percentage Log showing the location of clustered
points (if a pattern has been assigned to the cluster) is displayed as well. The depth
range for the cross plotted data points is indicated by a red shaded area.
For each plot an individual preview is created. You can use the controls at the
bottom of the preview to browse the tabs.