WellCAD Basics - Advanced Logic Technology

Scale Mode:
APPENDIX A - 463
The scale settings control the units used for the radial axis of the rose diagram and is
proportional to the number of structures having an azimuth/dip value within the
same azimuth/dip window.
Absolute Count: The scale unit is the absolute number of counts for all structures.
Percent Of Log Total: The scale unit is a value in percent of the total number of
counts in the source log.
Percent Of Depth Interval: The scale unit is a value in percent of the total number
of counts in the current depth interval.
Enter your scale value according to the selected scale option.
Counting Sector Parameter:
The counting window settings control the criteria on which the histogram classes are
built. The Step value is the increment in degrees between two counting sectors. The
Width value defines the width of the sector around the central value (if the option
Wedge Diagram has been chosen) or from one value to the next.
Sectors start at 0 (left), Wedge Diagram (right)
Choosing a Width larger than the Step results in overlapping sectors (double counts
possible), while selecting a Width smaller than the Step causes some events not to be
taken into account.
Diagram Color:
Select the color that will be used for the rose display.
Grid Options:
You can display concentric grids for the count rate or a grid showing the count
sectors. In addition a vector pointing to the mean azimuth/dip direction can be
displayed.