WellCAD Basics - Advanced Logic Technology

Default Settings:
APPENDIX A - 447
The default ambient and spot light intensity are numerical value ranging from 0 to 1.
A value of 1 sets the light intensity to its maximum value while a value of 0 sets it to
its minimum intensity. Lighting settings are part of the log main settings.
Changing the memory buffer size
To render the 3D object, WellCAD uses a memory buffer to hold internally the
bitmap representing the scene, regardless if it is on screen or on printer. The bigger
the memory buffer, the more detail of the 3D log is rendered, but remember also
that more memory processing time will be used. For an average configuration, a
value of 2048 KB is a good choice. For higher resolution on a more powerful
machine with more RAM, the value can be increase to 5192 or even more.