WellCAD Basics - Advanced Logic Technology

APPENDIX A - 403
Clear Contents:
Erases all data from the log without removing the log from the document.
Slice at:
Splits the data set into upper and lower part.
Shift by:
Performs a constant depth shift of the entire data set.
Conversion to other log types:
You can convert Structure Log data into Mud Logs – one Mud log will be created
for the dip, azimuth (or dip direction) and aperture data.
It is also possible to create a new Structure Log containing a subset of selected
structure categories from the original Structure Log. Go to the Edit > Convert Log
To menu and select the desired conversion option.
For both conversion options you can determine which dip, azimuth, aperture ranges
and attributes are exported. The different options should been seen as optional
filters. If not checked, no filter will be applied and all attributes or dip, azimuth or
aperture ranges will be transferred.
Select the structure classes to convert