WellCAD Basics - Advanced Logic Technology

APPENDIX A - 247
polarity positive data values extend to the right and negative values to the left of the
zero level.
Dynamic Bar (left) and Dynamic Bar with polarity (right)
In Dynamic Bar style upper and lower limits of adjacent data points are linked to
form a continuous dynamic bar. If the data is displayed with polarity positive data
values extend to the right and negative values to the left of the zero level.
As data is represented as bar of a certain height, you can set the point of depth
correspondence (e.g. top, middle or bottom of bar) clicking the Advanced Button
(see explanation further down).
BarEdge Line (left) and Standard Line (right)
The Bar Edge Line style links data points together to form a line, which is the
envelope of the dynamic bar style. When data is displayed in Standard Line style all
data points are connected to form a continuous interpolated line (similar to a Well
Log curve). The thickness of the line drawn in Bar Edge and Standard style can be
changed in the adjacent edit box. Simply enter a number that corresponds to the line
thickness in tenths of millimeter.