WellCAD Basics - Advanced Logic Technology

370 - APPENDIX A
www.alt.lu
components you would like to handle, the depth sampling rate and startup depth
range. For the startup your log data will be set to equal amounts of the selected
components.
If you have already one Well Logs per component in your borehole document
containing the fraction data, select the Logs option and click on the logs from
which you would like to copy the data into the new Analysis Log. Depth range and
sampling rate will automatically be determined from the source logs.
Click OK and the Main Settings dialog box will open next to let you specify how the
components are displayed.
Main Settings:
Analysis Log Settings dialog box
Title:
Enter the title that identifies the log. The title will be displayed in the Title area of
the log handle.
Unit:
Set the unit string that will appear in the log title zone.
Scale:
Set the scale low and high value. Usually you will use 0 to 100 but as you might get
normalized values (0 to 1) or other values you can alter the scale accordingly.
Grid:
Set the details for the appearance of vertical grid lines.