WellCAD Basics - Advanced Logic Technology

184 - BOOK 1 - WELLCAD BASICS
www.alt.lu
If the option is set to Dynamic the box will be stretched according to the change in
Borehole Document width and height.
1.6.2 Managing Annotation Layers
As already mentioned in the introduction of this chapter, annotations can be
organized in different layers in order to hide their display when it is appropriate. You
can also lock a layer and prevent the contained symbols from being edited.
Adding an additional Annotation Layer
� Select Insert New Annotation Layer from the Edit menu and enter the
name of the new layer in the dialog box that opens.
Or
� Select the Annotation Layer Settings option and use the New button in
the dialog box that pops up.
Use the drop down list from the Annotation Bar to select a particular layer. You
have to switch to Annotation Mode first before you can access the drop down
control.
Select the layer that you
want to edit.
The drop down control displays also the status of the selected layer. The light bulb
icon indicates whether the layer is displayed ( ) or hidden ( ). The selected
annotation layer can be edited if the lock icon is highlighted (
settings of an annotation layer:
). To change the
� Open the View menu and select the Annotation Layer Settings option.
A dialog box pops up listing all layers and allowing adding new ones as well as
changing the name, displaying and lock status. Click in the corresponding cell to edit
the value.