Dismounted Reconnaissance Troop - Army Electronic Publications ...
Dismounted Reconnaissance Troop - Army Electronic Publications ...
Dismounted Reconnaissance Troop - Army Electronic Publications ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Chapter 3<br />
Security requirements and techniques for combat trains or supporting sustainment elements.<br />
Movement and positioning of trains and sustainment supply points.<br />
Resupply, including emergency resupply and caches, covering the following:<br />
Caches for Class I, III, IV, and VIII and other mission-specific items such as batteries.<br />
Drop points away from the platoon vehicle hide position and OPs.<br />
Casualty consolidation and evacuation.<br />
Equipment and supply destruction criteria. Communications considerations include the<br />
following:<br />
Positioning of the DRT commander, XO, or CP and, if necessary, retrans to maintain<br />
communications with the reconnaissance squadron and other designated elements.<br />
Method and techniques for communications between CP vehicles, platoon CP vehicles and<br />
dismounted elements.<br />
Responsibilities and procedures for integrating supporting analog platoon elements into the<br />
troop digital network.<br />
3-55. Critical tasks of the zone reconnaissance include:<br />
Find and report all enemy forces within the zone.<br />
Clear all enemy forces in the designated AO within the capabilities of the unit conducting the<br />
reconnaissance.<br />
Determine the trafficability of all the terrain within the zone, including built-up areas.<br />
Locate and determine the extent of all contaminated areas in the zone.<br />
Evaluate and classify all bridges, defiles, overpasses, underpasses, and culverts in the zone.<br />
Locate any fords, crossing sites, or bypasses for existing and reinforcing obstacles (including<br />
built-up areas) in the zone.<br />
Locate all obstacles and create lanes as specified in execution orders.<br />
Report the above information to the commander directing the zone reconnaissance, to include<br />
providing a sketch map or overlay.<br />
AREA RECONNAISSANCE<br />
3-56. An area reconnaissance is a form of reconnaissance that focuses on obtaining detailed information<br />
about terrain or enemy activity within a prescribed area. This area may include a town, a ridgeline, woods,<br />
an airhead, or any other feature critical to operations. The area may consist of a single point, such as a<br />
bridge or an installation. Areas are normally smaller than zones and are not unusually contiguous to other<br />
friendly areas targeted for reconnaissance. Because the area is smaller, reconnaissance moves faster than a<br />
zone reconnaissance. (See FM 3-90.)<br />
ORGANIZATION OF THE DISMOUNTED RECONNAISSANCE TROOP<br />
3-57. The DRT conducting an area reconnaissance organizes according to the size, geography, physical<br />
infrastructure, and social dynamics of the area to be reconnoitered. The troop can conduct decentralized<br />
reconnaissance in multiple areas simultaneously, either by maneuvering elements through the areas or by<br />
establishing stationary OPs.<br />
GRAPHIC CONTROL MEASURES<br />
3-58. Area reconnaissance may be controlled using an LD, lateral boundaries, and an LOA. Within the<br />
area, the troop commander can further divide the AO with additional lateral boundaries to define platoon<br />
AOs. Phase lines and contact points can be designated to coordinate the movement of elements operating<br />
abreast. Critical terrain features or recognizable landmarks can be designated as checkpoints. Fire support<br />
coordination measures can be included. The example in Figure 3-2 shows a DRT conducting area<br />
reconnaissance of an area subdivided into smaller AOs, with a SUAS conducting a forward screen.<br />
3-12 ATTP 3-20.97 16 November 2010