05.08.2013 Views

DM1100™ DM Series™ Digital Mailing System Operator Guide

DM1100™ DM Series™ Digital Mailing System Operator Guide

DM1100™ DM Series™ Digital Mailing System Operator Guide

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Tape Feeding Problems<br />

Description Possible Causes Solution<br />

Tape stalling in the<br />

cutter.<br />

Tape pieces or paper slivers are<br />

blocking the knife path.<br />

Tape is catching on moistening<br />

brush.<br />

Tape stalling. Pressure sensitive tape only:<br />

Adhesive is extending beyond<br />

tape backing.<br />

Leading edge of tape roll is torn or<br />

folded under the tape roller.<br />

<strong>DM</strong>1100 <strong>Digital</strong> <strong>Mailing</strong> <strong>System</strong> Operating <strong>Guide</strong><br />

Clear pieces from the knife path. If problem<br />

continues, call for service.<br />

Remove tape brush and reset in its holder to an<br />

appropriate lenght.<br />

When loading pressure sensitive tape, be sure<br />

entire tape edge at feed roller is covered with<br />

protective backing.<br />

Remove tape from under roller. Cut tape for<br />

straight edge. Reinsert tape leading edge under<br />

roller and ensure it is not crimped or folded.<br />

Jam is on tape roller. Remove tape from roller, clear materials from<br />

roller path and reinsert tape.<br />

Tape track is dirty or clogged.<br />

Adhesive is on track.<br />

To adjust brush, move<br />

to the left.<br />

Call the Help Desk for help clearing the tape<br />

track. Refer to the Pitney Bowes Contact Information<br />

List in the guide for more information.<br />

SV62220 Rev. A 10-9

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!