DM1100™ DM Series™ Digital Mailing System Operator Guide
DM1100™ DM Series™ Digital Mailing System Operator Guide
DM1100™ DM Series™ Digital Mailing System Operator Guide
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Timeouts:<br />
Normal Preset<br />
Timer<br />
NOTE: Features/<br />
Services may vary by<br />
model and or country.<br />
Timeouts:<br />
Feeding Timeout<br />
NOTE: Features/<br />
Services may vary by<br />
model and or country.<br />
Timeouts:<br />
Transaction<br />
Timeout<br />
NOTE: Features/<br />
Services may vary by<br />
model and or country.<br />
<strong>DM</strong>1100 <strong>Digital</strong> <strong>Mailing</strong> <strong>System</strong> Operating <strong>Guide</strong><br />
The normal preset timer option allows you to specify how much time you<br />
want to allow the system to remain idle before it returns to the Normal Preset<br />
settings (refer to Define Preset section in this chapter for more information<br />
on Normal Presets).<br />
You can set this timeout for 0 - 1440 minutes, in 1 minute increments. The<br />
default timeout is 30 minutes.<br />
1. Press the Menu key and select Set Up.<br />
2. Select Basic Settings and then Timeouts.<br />
3. Select Normal Preset Timer.<br />
4. To set the timer, enter the number of minutes (0-1440) using the<br />
numeric keyboard.<br />
5. If you want the system to stay at the last settings used, select Never<br />
reset to Normal Preset.<br />
6. Press the Enter key.<br />
Use this option to specify how much time to allow before the feeder stops<br />
after the last envelope is processed.<br />
You can set this timeout for 5 - 90 seconds, in 1 second increments. The<br />
default timeout is 5 seconds.<br />
This reduces the wear on your machine and acts as a safety measure if<br />
you leave the machine unattended.<br />
1. Press the Menu key and select Set Up.<br />
2. Select Basic Settings and then Timeouts.<br />
3. Select Feeding Timeout.<br />
4. Enter the number of seconds (0 - 90) using the numeric keyboard, or<br />
press the screen key corresponding to Turn Rollers off Immediately,<br />
or Run Until Stop key is Pressed.<br />
5. If you entered the number of seconds, press the Enter key.<br />
This option is available only if your mailing machine is connected to the<br />
AccuTrac Mail Accounting system.<br />
Use this option if you routinely batch your mail runs. This option allows you<br />
to specify how much time to allow the system to remain idle before it ends<br />
the current accounting transaction. You can set this timeout for 10 - 65520,<br />
in 1 second increments. The default timeout is 14,400 seconds.<br />
1. Press the Menu key and select Set Up.<br />
2. Select Basic Settings and then Timeouts.<br />
3. Select Transaction Timer.<br />
4. Enter the number of seconds (10 - 65520) using the numeric keyboard.<br />
5. Press the Enter key.<br />
SV62220 Rev. A 5-15