DM1100™ DM Series™ Digital Mailing System Operator Guide
DM1100™ DM Series™ Digital Mailing System Operator Guide
DM1100™ DM Series™ Digital Mailing System Operator Guide
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Mode Selection:<br />
WOW - WEIGH-<br />
ON-THE-WAY<br />
Mode Selection:<br />
Weigh First Piece<br />
<strong>DM</strong>1100 <strong>Digital</strong> <strong>Mailing</strong> <strong>System</strong> Operating <strong>Guide</strong><br />
The WOW feature increases your productivity by weighing the piece of<br />
mail and applying the correct postage as it travels through the mailing<br />
machine.<br />
WARNING! Do not lean on or disturb the system while it is processing<br />
mail in this mode. It will affect the amount of postage applied to<br />
the mail piece.<br />
To run mail in the WOW mode:<br />
1. Press the Mode key.<br />
2. Select WOW - Weigh on the Way.<br />
3. Press the Class key and select the class. For more information, refer to<br />
“Selecting the Class, Carrier, Special Services or Options” in this chapter.<br />
4. Press the Seal key and select your sealing option.<br />
5. Place the stack of mail on the feed deck.<br />
6. Press the Start key.<br />
7. If you are using the optional Power Stacker, we recommend you<br />
remove your mail in manageable stacks and not allow the deck to fill<br />
completely. The system will halt the stacker if it is filled to its maximum<br />
capacity.<br />
This feature is available only on systems that have the optional<br />
WEIGH-ON-THE-WAY (WOW) module installed.<br />
In this mode, the machine weighs the first mail piece and processes the<br />
remaining mail at the same postage rate.<br />
WARNING! Do not lean on or disturb the system while it is processing<br />
mail in this mode. It will affect the amount of postage<br />
applied to the mail piece.<br />
To run mail in this mode:<br />
1. Press the Mode key.<br />
2. Select Weigh First Piece.<br />
3. Press the Class key and select the class. For more information, refer to<br />
4-“Selecting the Class, Carrier, Special Services or Options” in this<br />
chapter.<br />
4. Press the Seal key and select your sealing option.<br />
5. Place the stack of mail on the feed deck.<br />
6. Press the Start key.<br />
7. If you are using the optional Power Stacker, we recommend you<br />
remove your mail in manageable stacks and not allow the deck to fill<br />
completely. The system will halt the stacker if it is filled to its maximum<br />
capacity.<br />
SV62220 Rev. A 4-11