DM1100™ DM Series™ Digital Mailing System Operator Guide
DM1100™ DM Series™ Digital Mailing System Operator Guide
DM1100™ DM Series™ Digital Mailing System Operator Guide
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
5 • <strong>Mailing</strong> <strong>System</strong> Setup<br />
Setting<br />
Auto-Enter<br />
You can set up your system so that after it scans in a barcode value and<br />
displays it on the IntelliLink® Control Centre screen, it requires you to press<br />
the Enter key to accept that value. You can do this if you want to be sure<br />
that an operator verifies that the correct barcode has been scanned. By<br />
default, the system will automatically enter the value as soon as it scans in<br />
the barcode.<br />
To require you to press Enter to accept each scan:<br />
1. Press the Menu key on the control centre, then select Set Up.<br />
2. Press the down arrow key and then select Barcode Scanner.<br />
3. At the "Barcode Scanner Setup" menu, select Auto-enter.<br />
4. Select Off to disable the Auto-enter. This will now require you to manually<br />
press the Enter key after each scan.<br />
5-24 SV62220 Rev. A