DM1100™ DM Series™ Digital Mailing System Operator Guide
DM1100™ DM Series™ Digital Mailing System Operator Guide
DM1100™ DM Series™ Digital Mailing System Operator Guide
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
5 • <strong>Mailing</strong> <strong>System</strong> Setup<br />
1<br />
Setting the<br />
Display<br />
Language<br />
NOTE: Features/<br />
Services may vary by<br />
model and or country.<br />
2<br />
Adjusting<br />
Display<br />
Contrast<br />
NOTE: Features/<br />
Services may vary by<br />
model and or country.<br />
3<br />
Adjusting<br />
the Feeder<br />
Deck<br />
Sensor<br />
NOTE: Features/<br />
Services may vary by<br />
model and or country.<br />
Depending on the model of your mailing system, you may be able to set the<br />
display to any of the following languages:<br />
• English<br />
• Espanol<br />
• Francais<br />
To change the language of the display:<br />
1. Press the Menu key.<br />
2. Select Set Up, or press 1 and the Enter key.<br />
3. Select Change Language, or press 4 and the Enter key.<br />
4. Select the language you want to appear in the display.<br />
5. Press the Enter key.<br />
You can adjust the contrast of your display and set the volume (1D00 only)<br />
of the speaker on your mailing system.<br />
To adjust the contrast level of your display:<br />
1. Press the Menu Key.<br />
2. Press the down arrow key and then select Adjust Display Contrast, or<br />
press ? and the Enter key<br />
3. Use the left or right arrow keys on the control centre to select the contrast<br />
(1 - 9) you want. The screen updates to the new setting.<br />
4. Press the Enter key to save this setting.<br />
The feeder deck sensitivity adjustments improve mail piece sensing capabilities<br />
on <strong>DM</strong>1100 mailing systems, eliminating the need to press down<br />
on the hopper mail stack to activate the feeder.<br />
1. Press the Menu Key.<br />
2. Press the down arrow key and then select Adjust Feeder Deck<br />
Sensor.<br />
• Press the right arrow key to view specific instructions about sensitivity<br />
adjustments.<br />
• Select Increase by 1 to increase the sensitivity of the Hopper Sensor.<br />
• Select Decrease by 1 to decrease the sensitivity of the Hopper<br />
Sensor.<br />
• Select Return to Factory Default to set the Hopper Sensor to the<br />
default setting.<br />
3. Press the Enter when done.<br />
5-4 SV62220 Rev. A