DM1100™ DM Series™ Digital Mailing System Operator Guide
DM1100™ DM Series™ Digital Mailing System Operator Guide
DM1100™ DM Series™ Digital Mailing System Operator Guide
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Tape Feeding Problems<br />
Description Possible Causes Solution<br />
Gummed tape is not<br />
wet.<br />
(continued)<br />
Brush not out far enough to reach<br />
tape.<br />
Valve in moistener bottle cap is<br />
not working.<br />
Low E-Z Seal® Sealing Solution<br />
message is not working.<br />
<strong>DM</strong>1100 <strong>Digital</strong> <strong>Mailing</strong> <strong>System</strong> Operating <strong>Guide</strong><br />
1. Move the tape lever to the up position.<br />
2. Move the brush lever to the right to pull the<br />
brush mechanism forward.<br />
Brush Lever<br />
Tape<br />
Lever<br />
3. Remove the brush.<br />
4. Pull out brush and readjust to longer length.<br />
5. Reinstall brush and release holder to return<br />
original position.<br />
Call the Help Desk. Refer to the Pitney Bowes<br />
Contact Information List in the guide for more<br />
information<br />
Call the Help Desk. Refer to the Pitney Bowes<br />
Contact Information List in the guide for more<br />
information<br />
SV62220 Rev. A 10-11