DM1100™ DM Series™ Digital Mailing System Operator Guide
DM1100™ DM Series™ Digital Mailing System Operator Guide
DM1100™ DM Series™ Digital Mailing System Operator Guide
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Setting the<br />
Default Scan<br />
Type<br />
<strong>DM</strong>1100 <strong>Digital</strong> <strong>Mailing</strong> <strong>System</strong> Operating <strong>Guide</strong><br />
If you are using an accounting system on your mailing system you can set<br />
up the scanner so that it knows what field is scanning without using a prefix<br />
code. Your selection of Account Name or Account Code depends on your<br />
accounting system. You can then scan the account code or name directly<br />
from the Main screen on IntelliLink® Control Centre display.<br />
To set the default value:<br />
1. Press the Menu key on the control centre, then select Set Up.<br />
2. Press the down arrow key and then select Barcode Scanner.<br />
3. At the "Barcode Scanner Setup" menu, select Default Scan Type.<br />
4. Select the appropriate option according to the table here:<br />
If your accounting<br />
system is:<br />
Business Manager<br />
Budget Manager<br />
And the barcode<br />
contains:<br />
Select this default<br />
scan type:<br />
Account Name Account Name<br />
Account Code Account Code<br />
Preset Preset<br />
Job ID 1 Job ID 1<br />
Job ID 2 Job ID 2<br />
Account Name Account Name<br />
Account Code Account Code<br />
Preset Preset<br />
Job ID 1 Job ID 1<br />
Job ID 2 Job ID 2<br />
5. If you do not want any default account system, or preset, or if you will<br />
be scanning multiple fields select None.<br />
6. As soon as you make your selection, the "Barcode Scanner Setup"<br />
menu reappears. You can make other selections or press the left arrow<br />
key to return to the "Set Up" menu.<br />
SV62220 Rev. A 5-21