DM1100™ DM Series™ Digital Mailing System Operator Guide

4 • Running Mail
8
Advancing
the Date
7. Turn your mail piece around 180 degrees so that the original digital indicia
is in the lower left corner as shown here:
Mr. J. Doe
123 Main Street
Anywhere
8. Then place the envelope in the feed deck with the flap facing down and
press the Start key.
If you would prefer to print a tape to evidence the postage correction,
press the Tape key and apply the tape to the appropriate place on the
mail piece.
The additional postage prints on the envelope as shown here:
9. Once you have completed processing or printing your postage correction
indicia, press the Normal Preset button on the IntelliLink Control
Centre. This takes you back to the normal mail processing mode.
If you are printing the date correction on an envelope and if the envelope is
sealed, press the Seal key and select Sealer Off. If you are printing on a
tape then changing the seal mode is not required.
1. Select Custom Presets, then select redate.
The display will return to the Normal Preset screen and Class will be
populated with OthPay Date.
2. Select Menu then select Indicia Options, then select Date, and then
select Advance Date. The following screen will be displayed:
3. Select the number of days you want to advance the date, then press
Enter, and then use the arrow keys to return to Home, which returns
you to the Normal Preset screen.
The digital indicia in the screen display now shows a forward date
equivalent to the number of days you advanced it.
4. Turn your mail piece around 180 degrees so that the original digital indicia
is in the lower left corner as shown here:
Mr. J. Doe
123 Main Street
Anywhere
Advance Date
Printed Date: Wed 2006.02.22
Enter number of days to advance:
0
4-22 SV62220 Rev. A
00.41
00 30
00.41
Mr. J. Doe
123 Main Street
Anywhere