Configuring Hardware and Communication Connections STEP 7.pdf

Networking Stations
Messages in the window "Outputs for Consistency Check" are displayed as errors,
if no system data (SDBs) could be created during saving and compiling or before
downloading to the PLC. Without generated system data it is possible to download
the hardware/network and connection configuration cannot be downloaded to the
PLC.
Messages in the window "Outputs for Consistency Check" are displayed as
warnings, if the signaled state allows the generation of system data (SDBs).
If you select a line in the upper section of the output window, this line is repeated in
the lower section of the window in word-wrapped text. You do not need to scroll to
see all the text.
Selecting a Faulty/Inconsistent Object
Double-click on the corresponding message or warning in the window "Outputs for
Consistency Check", or select the Edit > Go to Error Location menu command
for this window.
Help on a Message/Warning
Select the message or warning and press F1, or select the Edit > Show Help on
Message menu command.
Saving Messages/Warnings
Select the File > Save Messages menu command in the output window.
Configuring Hardware and Communication Connections with STEP 7
A5E00706939-01 11-25