EPOS2 Application Notes Collection - Maxon Motor
EPOS2 Application Notes Collection - Maxon Motor
EPOS2 Application Notes Collection - Maxon Motor
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Extended Encoders Configuration<br />
Sensor Types<br />
DigIN7 “High Speed Command”<br />
DigIN8 “High Speed Command”<br />
Min. differential input voltage<br />
Line receiver (internal)<br />
Max. input frequency<br />
Differential<br />
Pins [B18] / [B19]<br />
Pins [B20] / [B21]<br />
±200 mV<br />
EIA RS422 Standard<br />
5 MHz<br />
Figure 13-155<br />
<strong>EPOS2</strong> Module 36/2 – DigIN7 “Differential” Circuit (analogously valid also for DigIN8)<br />
13.3.2.3 Choice of Manufacturers for Incremental Encoder 2<br />
Manufacturer<br />
maxon<br />
Baumer<br />
Heidenhain<br />
Hengstler<br />
Scancon<br />
Contact<br />
maxon motor ag, CH-6072 Sachseln<br />
www.maxonmotor.com<br />
Baumer Electric AG, CH-8501 Frauenfeld<br />
www.baumerelectric.com<br />
DR. JOHANNES HEIDENHAIN GmbH, DE-83292 Traunreut<br />
www.heidenhain.de<br />
HENGSTLER GmbH, DE-78554 Aldingen<br />
www.hengstler.com<br />
SCANCON A/S, DK-3450 Alleroed<br />
www.scancon.dk<br />
and others<br />
Table 13-184<br />
Incremental Encoder 2 – Manufacturers (not concluding)<br />
maxon motor control<br />
<strong>EPOS2</strong> Positioning Controllers Document ID: rel3956 13-195<br />
<strong>EPOS2</strong> <strong>Application</strong> <strong>Notes</strong> <strong>Collection</strong> Edition: April 2013<br />
© 2013 maxon motor. Subject to change without prior notice.
Change language