Flamenco Technical Manual Revision 6.0 - Tunstall.de

More documents

Recommendations

Info

8. Laying the cables 8.4 Current demand The table below was prepared to calculate the required current in the Flamenco system. The values are average figures and may differ for individual applications. Total current consumption will vary according to the number of functions used at any one time. Additional current consumption 05 0024 01 Loudspeaker with announc. interf. 80 mA 11 5350 00 Telephone interface relay 10 mA 70 xxxx xx Switches 10 mA 70 0171 03 Connection socket with call switch 15 mA 70 0171 50 Connection socket with call switch, 21 mA While light button is pressed: max. 179 mA bedhead unit 70 0360 10 IR TV control module universal 15 mA During data transmission: for a short time 35 mA 70 0360 11 IR TV control module universal audio 15 mA During data transmission: for a short time 35 mA 70 04x4 x0 Connection socket combi / combi, 30 mA bedhead unit 70 0790 00 Sound detector 16 mA 70 08xx 00 RAN interfaces 20 mA 70 0831 00 1‐channel radio receiver 35 mA 74 0747 00 Patient handset 20 mA 77 011x 02 Direction lamp / Group lamp 0 mA Each lighted section: 75 mA 77 0150 00 Corridor display Alpha 16 Average current consumption: 300 mA 77 0160 00 Corridor display Alpha 16, double-sided Average current consumption: 600 mA 77 017x xx Room lamp or 20 mA Each lighted section: 30 mA Room lamp with doorplate 77 0182 10 Room lamp Universal, 2 sections 0 mA Each lighted section: 30 mA 77 0350 00 Door entry speaker 30 mA During operation: 45 mA 77 0510 00 ComTerminal Flamenco 115 mA Display backlight switched on + all LED: 40 mA 77 0520 00 RoomTerminal Flamenco 52 mA Display backlight switched on + all LED: 40 mA 77 055x 00 ControlTerminal Flamenco or 42 mA Each lighted section: 30 mA ControlTerminal with doorplate Flamenco 77 0605 50 ComStation BUS-C 230 mA 77 0606 00 ComStation CT Flamenco 115 mA Display backlight switched on + all LED: 40 mA 77 0606 20 ComStation T Flamenco 52 mA Display backlight switched on + all LED: 40 mA 77 0801 00 OSYlink‐Door entry speaker 53 mA 77 0802 00 OSYlink‐Group lamp 26 mA 77 0803 00 OSYlink‐Universal 35 mA 77 0804 00 OSYlink‐Announcement 32 mA 77 2100 00 OSYnet‐SafetyController 30 mA 77 4000 00 OSYnet‐Y‐RepeaterOpto 60 mA 77 4001 00 OSYnet‐Gateway 50 mA One power supply unit is required for each OSY-ControlCenter (Order no. 77 2x0x 00). 54 Flamenco - Technical Manual, 04/13 (Rev. 6.0), 00 8812 60
8. Laying the cables 8.4.1 Standard basis for calculation To calculate the required current, first add all standby current figures or the average current consumption, respectively. In a simplified manner, the additional current demand can be calculated as follows: You may assume that on the average 5 calls, 5 presence states and one speech connection are active at any one time. Current demand for each call = 100 mA Current demand for each presence state = 100 mA Current demand for each speech connection = 50 mA The power supply unit should not be loaded by more than 80% of its capacity. Maximum capacity for the power supply units is 12.5 A. The 80% permissible load, therefore, amounts to 10 A. 8.4.2 Sample calculation for 25 two-bed rooms with WC Number Device Standby current: for each device for 25 rooms 25 ComTerminal Flamenco 115 mA 2875 mA 25 Room lamp, 3 sections 20 mA 500 mA 25 Room lamp, code blue/cardiac alarm, WC 20 mA 500 mA 50 Connection socket, bedhead unit 30 mA 1500 mA 50 Patient handset 20 mA 1000 mA 50 Switch 10 mA 500 mA 1 ComStation BUS-C 230 mA 230 mA 1 OSYlink‐Group lamp 26 mA 26 mA 1 Group lamp, 3 sections 0 mA 0 mA Number Function Sum (standby current consumption): Additional current: per function 7131 mA per ward 5 active call 100 mA 500 mA 5 active presence state 100 mA 500 mA 1 active speech connection 50 mA 50 mA Sum (additional current consumption): 1050 mA Total (standby current consumption + additional current consumption): 8181 mA 80% load on a power supply unit = 10 A (100% load = 12.5 A). Result: 1 power supply unit is required for the above 25 two-bed rooms with WC. Flamenco - Technical Manual, 04/13 (Rev. 6.0), 00 8812 60 55
Page 2 and 3:
The manual was prepared with due ca
Page 4 and 5:
10. Configure the OSY-ControlCenter
Page 6 and 7: 1. Safety Comply with all generally
Page 8 and 9: 1. Safety 1.6 Technical standards C
Page 10 and 11: 2. Necessary previous knowledge 2.2
Page 16 and 17: 3. Room types 3.1 Patient / residen
Page 18 and 19: 3. Room types 3.1.2 Patient / Resid
Page 20 and 21: 3. Room types 3.1.3 Patient / resid
Page 22 and 23: 3. Room types 3.1.4 Patient room: L
Page 24 and 25: 3. Room types 3.1.5.2 Patient room:
Page 26 and 27: 3. Room types 3.1.6 Patient room: S
Page 28 and 29: 3. Room types 3.3 Ward bathroom 3.3
Page 30 and 31: 3. Room types 3.4 Nurse station 3.4
Page 32 and 33: 3. Room types 3.4.3 Nurse station:
Page 34 and 35: 3. Room types 3.4.5 Nurse station:
Page 36 and 37: 3. Room types 34 Flamenco - Technic
Page 38 and 39: 4. Installation examples 230 V AC 7
Page 40 and 41: 4. Installation examples 77 0510 00
Page 42 and 43: 4. Installation examples 40 Flamenc
Page 44 and 45: 5. Installation work sequence 42 Fl
Page 46 and 47: 6. Defining the mounting positions
Page 52 and 53: 7. Installing the back boxes Connec
Page 54 and 55: 8. Laying the cables 8.2 Electromag
Page 58 and 59: 8. Laying the cables 8.5 Group bus
Page 60 and 61: 8. Laying the cables 8.5.4 Maximum
Page 62 and 63: 8. Laying the cables Not service-fr
Page 64 and 65: 9. Activating the power supply 9.2.
Page 66 and 67: 10. Configure the OSY-ControlCenter
Page 68 and 69: 11. Voltage surge protection 11.1 S
Page 70 and 71: 11. Voltage surge protection Buildi
Page 72 and 73: 12. Functional checks 12.1 Checking
Page 74 and 75: 12. Functional checks 12.1.2.2 Chec
Page 80 and 81: 13. Spare parts Functions Screw con
Page 82 and 83: 13. Spare parts Functions Connectin
Page 84 and 85: 13. Spare parts 82 Flamenco - Techn
Page 86 and 87: 14. Product leaflets Order no. Prod
Page 88 and 89: 14. Product leaflets Flamenco - Tec
Page 90 and 91: Installationsanleitung D Installati
Page 92 and 93: Anschlüsse D Connections GB Anschl
Page 94 and 95: Anschlüsse D Connections GB Anschl
Page 98 and 99: Anschlüsse D Connections GB 77 018
Page 100 and 101: 14. Product leaflets Flamenco - Tec
Page 106 and 107:
Installationsanleitung D Installati
Page 108 and 109:
14. Product leaflets Page 106 Flame
Page 110 and 111:
Page 112 and 113:
Konfigurationsanleitung - Seite 1 D
Page 114 and 115:
Page 116 and 117:
Page 118 and 119:
Page 120 and 121:
Anschlüsse D Connections GB Contro
Page 122 and 123:
Page 124 and 125:
Page 126 and 127:
Page 128 and 129:
Anschlüsse D Connections GB Zum An
Page 130 and 131:
Anschlüsse D Connections GB ELA EL
Page 132 and 133:
Anschlüsse am Anschlussfeld D Conn
Page 134 and 135:
Anschlüsse D Connections GB Zimmer
Page 136 and 137:
Anschlüsse am Anschlussfeld D Conn
Page 138 and 139:
Anschlüsse D Connections GB ComSta
Page 140 and 141:
Page 138
Page 142 and 143:
Konfigurationsanleitung - Seite 2 -
Page 144 and 145:
Page 146 and 147:
Page 148 and 149:
Page 150 and 151:
Page 152 and 153:
Page 154 and 155:
Page 156 and 157:
Page 158 and 159:
Page 160 and 161:
Page 162 and 163:
Page 164 and 165:
Page 166 and 167:
Page 168 and 169:
Page 170 and 171:
I I I I Anschlüsse D Connections G
Page 172 and 173:
Page 174 and 175:
Anschlussplan für Rauchmelder, Bes
Page 176 and 177:
Page 178 and 179:
Anschlüsse D Connections GB Gefahr
Page 180 and 181:
Kontrollanzeigen (LED) D Control LE
Page 182 and 183:
Anschlüsse D Connections GB Ip Ip
Page 184 and 185:
Power supply unit UPS, Order No. 77
Page 186 and 187:
Page 188 and 189:
Page 190 and 191:
Power supply unit UPS 60, Order No.
Page 192 and 193:
Page 194 and 195:
Page 196 and 197:
Power supply unit, Order No. 77 340
Page 198 and 199:
Power supply unit, Order No. 77 340
Page 200 and 201:
Battery Set for UPS 60, Order No. 7
Page 202 and 203:
Battery Set for UPS 60, Order No. 7
Page 204 and 205:
Page 206:
show all

Flamenco Technical Manual Revision 6.0 - Tunstall.de

Create successful ePaper yourself

Delete template?

Save as template?