Flamenco Technical Manual Revision 6.0 - Tunstall.de
Flamenco Technical Manual Revision 6.0 - Tunstall.de
Flamenco Technical Manual Revision 6.0 - Tunstall.de
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
10. Configure the OSY-ControlCenter<br />
Before starting the operation of the nurse call system, the OSY-ControlCenter<br />
must be configured with the specific data of the relevant project. This configuration<br />
is realised exclusively using the software 'SystemOrganizer'. Standard<br />
procedure is that the OSY-ControlCenter is configured at <strong>Tunstall</strong> before it is<br />
<strong>de</strong>livered. However, the configuration may also take place on-location in the<br />
hospital or via remote service mo<strong>de</strong>.<br />
All project-specific data must be on hand when starting with the configuration<br />
process.<br />
Fig. 6:<br />
SystemOrganizer software<br />
10.1 Parameters to be configured<br />
<br />
<br />
<br />
<br />
Country-specific settings<br />
Designation for rooms, wards, buildings, etc.<br />
Setting of call types and system messages<br />
Parameters for call handling, e.g. call types, call categories, cancelling, privacy<br />
setting<br />
Organisational allocation of rooms (locations) to wards, work shifts, etc.<br />
Managing of mobile <strong>de</strong>vices DECT / PS.<br />
...<br />
<strong>Flamenco</strong> - <strong>Technical</strong> <strong>Manual</strong>, 04/13 (Rev. <strong>6.0</strong>), 00 8812 60<br />
63
Change language