Flamenco Technical Manual Revision 6.0 - Tunstall.de

14. Product leaflets
Each device is furnished with a product leaflet with information on mounting and
connection details. In addition, we have collated the relevant product leaflets
in this chapter of the technical manual.
WARNING ! Do not install the power supply unit at this time. The mounting and
installation of the various devices and equipment shall be executed with no
electric power in the system. Otherwise there is the ever present danger of a
short-circuit situation!
NOTE ! Check that the order no. on the products is the same as the order no.
on the installation plans. Example: Switches for WC call have the same housing
as the switches for normal call, however, they are programmed differently.
Order no. Product name Page
Display equipment
77 0112 02 Group lamp, 2 groups 88
77 0113 02 Group lamp, 3 groups 88
77 0114 02 Group lamp, 4 groups 88
77 0150 00 Corridor display Alpha 16 89-90
77 0160 00 Corridor display Alpha 16, double-sided 91-92
77 0170 00 Room lamp, 3 sections 93
77 0170 01 Room lamp code blue/cardiac alarm, WC 93
77 0170 10 Room lamp, 4 sections 94
77 0171 00 Room lamp, 3 sections, with doorplate 94
77 0171 10 Room lamp, 4 sections, with doorplate 94
77 0182 10 Room lamp Universal, 2 sections 95-96
77 0181 10 Room lamp Universal, 3 sections, with
97
doorplate
Switches
70 0106 00 Pneumatic call switch 100
70 0106 01 Pneumatic call switch/WC 100
70 0111 00 Call switch wp 101
70 0111 01 Call switch/WC wp 101
70 0112 00 Staff presence switch wp 102
70 0113 00 Cancel switch/WC wp 102
70 0114 00 Code blue / cardiac alarm switch wp 101
70 0115 00 Pull cord call switch wp 103
Flamenco - Technical Manual, 04/13 (Rev. 6.0), 00 8812 60
Page 83