NZ4202 - Unitec

SNZ NZS*4202
95 = 8583169 0042480 ô04
Issued June 1995 NZS 4202: 1995
SECTION 5 - PILING
5.1 OVERVIEW
Refer to section O, General rules, which shall be read in conjunction with this section.
5.2 PREAMBLES
5.2.1
Particulars shall be given of:
Any exceptional conditions relating to the works;
The nature of and access to the site;
The general contours of the site;
The water table:
--`,,``,,,,,,``,``,`,,,`,,,`,-`-`,,`,,`,`,,`---
The strata through which piles are driven or through which boring is to be
made;
5.2.2 Rates to include
Reference to records of test bores;
The maintenance of a piling log;
Any other available information.
The shifiing of all equipment to the required position for the placing of the pile.
5.3 GENERAL PRINCIPLES
5.3.1
All the work directly related to piling shall be scheduled in accordance with the
various sections of this Standard Method of Measurement unless otherwise stated.
5.3.2
An item shall be allowed for the provision, erection, maintenance and removal of
equipment for the piling. Reference shall be made to all conditions covering
equipment.
5.3.3
Driving or boring shall be scheduled separately and in accordance with the
requirements of the piling system.
5.3.4
Attention shall be directed to any temporary excavation that may be required. If
defined, temporary excavation should be measured as provided for in section 3.
5.3.5
Where storm or percolating water conditions are likely to be encountered, the
provisions of clauses 1.3.34 and 3.3.4 shall apply.
Copyright Standards New Zealand
Provided by IHS under license with SNZ
Document provided by IHS Licensee=Unitec Inst of Technology/5911177001,
03/02/2005 18:31:52 MST Questions or comments about this message: please call
the Document Policy Group at 303-397-2295.
5- 1