NZ4202 - Unitec

SNZ NZSu4202 95 m 8583169 0042534 TL7 m
Issued June 1995 NZS 4202: 1 995
17.4.1 I Sealants
17.4.1 1.1
Joint sealing compound shall be measured in metres, stating the type, grade,
sectional size and backing material if required. Primers for sealants and masking
shall be deemed to be included.
17.4.11.2
Compressible sealing strips shall be measured in metres for each uncompressed
size.
17.4.12 Hardware
All hardware shall be enumerated as follows:
--`,,``,,,,,,``,``,`,,,`,,,`,-`-`,,`,,`,`,,`---
Hardware fixed to walls, floors, timber, metal, glass or other material shall be
measured separately and so described;
Bolts, explosive fastenings and other metal anchors, fastenings and the like
required for fixing hardware shall be included in the description of the item
concerned;
The finish required to hardware shall be described;
The fixing of fanlight and window sash geared openers shall be described and
the lengths of cable or conduit, height above floor of operating gear, and of
sash bottom rails shall be stated:
Where monetary sums or rates are measured forthe supply only of hardware
the various types of fittings to be fixed shall be separately enumerated;
Where construction keying, masterkeying or keying alike of locks is required
this shall be stated in a separate item;
Removal of hardware for painting or the like shall be stated.
Copyright Standards New Zealand
Provided by IHS under license with SNZ
Document provided by IHS Licensee=Unitec Inst of Technology/5911177001,
03/02/2005 18:31:52 MST Questions or comments about this message: please call
the Document Policy Group at 303-397-2295.