NZ4202 - Unitec

Issued June 1995 NZS 4202: 1 995
23.4.3 Taps
Taps, cocks, valves, mixing chambers, shower roses, and the likeshall be enumerated.
23.4.4 Traps
Traps, floor wastes and overflows shall be enumerated and measured separately for
each size and type.
23.4.5 Fittings
23.4.5.1
Sanitary fixtures, fittings, appliances and the like shall be enumerated. Ancillary
items for sanitary fittings such as waste outlets, plugs, chains, stays, brackets, and
the like shall be included in the description.
23.4.5.2
Metal bench tops shall be enumerated.
23.4.5.3
Boilers, ranges, and the like shall be enumerated. The description shall include the
type, make, seatings, fixings and connections.
23.4.5.4
Fire fighting appliances, washing machines, dish washers, waste disposal units, and
the like shall be enumerated.
23.4.6 Gutters and downpipes
23.4.6.1
Gutters and spouting shall be measured in metres. Angles, mitres, stop ends,
expansion joints, sumps, rainwater heads, outlets, overflows and the like shall be
enumerated.
23.4.6.2
Downpipes shall be measured in metres. Offsets, angles, mitres, and the like shall
be enumerated. Jointing to drains shall be enumerated.
23.4.7 Flashings etc.
23.4.7.1
Flashings, shall be measured in metres stating the number of times bent, whether
notched over roofing ribs or dressed into corrugations etc. and the method of fixing;
stepped work shall be measured separately.
23.4.7.2
Cutting and/or sealing of flashing chases shall be described and measured in
metres.
23.4.8 Skylights
23.4.8.1
Sheet metal skylights shall be enumerated.
23.4.8.2
Glazing to skylights shall be measured in accordance with section 36.
Copyright Standards New Zealand
Provided by IHS under license with SNZ
--`,,``,,,,,,``,``,`,,,`,,,`,-`-`,,`,,`,`,,`---
Document provided by IHS Licensee=Unitec Inst of Technology/5911177001,
03/02/2005 18:31:52 MST Questions or comments about this message: please call
the Document Policy Group at 303-397-2295.
23-3