NZ4202 - Unitec
NZ4202 - Unitec
NZ4202 - Unitec
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
SNZ NZS*:Li202 95 8583369 OOg2552 820<br />
Issued June 1995 NZS 4202: 1 995<br />
32.4.8<br />
Tiling to circular work shall be measured separately.<br />
32.4.9<br />
Raking and circular cutting shall be measured in metres.<br />
32.4.10<br />
Skirtings, mouldings, isolated bands, coves, sinkings and the like shall be described<br />
and measured in metres. Mitres, angles, insets and the like shall be enumerated.<br />
32.4.1 1<br />
Treads, risers, strings and the like shall be measured in metres stating the width.<br />
32.4.12<br />
Integral bandsof tilesof different colour, textureorsizetothegeneraltiling and round<br />
edge tiles, shall be measured in metres as extra value, stating the width when<br />
appropriate.<br />
32.4.1 3<br />
Expansion joints shall be described and measured in metres.<br />
32.4.14<br />
Cutting and fitting around all openings and obstructions of less than 0.2 m2 and<br />
cutting and fitting around pipes, standards and the like, shall be enumerated.<br />
32.4.15<br />
Polishing and or specialist surface treatments shall be measured in square metres.<br />
Copyright Standards New Zealand<br />
Provided by IHS under license with SNZ<br />
--`,,``,,,,,,``,``,`,,,`,,,`,-`-`,,`,,`,`,,`---<br />
Document provided by IHS Licensee=<strong>Unitec</strong> Inst of Technology/5911177001,<br />
03/02/2005 18:31:52 MST Questions or comments about this message: please call<br />
the Document Policy Group at 303-397-2295.<br />
32-2