NZ4202 - Unitec
NZ4202 - Unitec
NZ4202 - Unitec
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
SNZ NZS*4202 95 W 8583369 0042489 T3L W<br />
NZS 4202: 1 995 Issued June 1995<br />
SECTION 7 - SPRAYED CONCRETE<br />
7.1 OVERVIEW<br />
Refer to section O, General rules, which shall be read in conjunction with this section.<br />
7.2 PREAMBLES<br />
7.2.1 Rates to include<br />
(a)<br />
(b)<br />
Screeds and screeding slabs;<br />
Waste and rebound;<br />
--`,,``,,,,,,``,``,`,,,`,,,`,-`-`,,`,,`,`,,`---<br />
(c)<br />
(d)<br />
Stop-work joints;<br />
Curing.<br />
7.3 GENERAL PRINCIPLES<br />
7.3.1<br />
The General Principles of section 6, Concrete work, shall apply to this section except<br />
as follows:<br />
(a)<br />
(b)<br />
(c)<br />
Sprayed concrete shall be scheduled in cubic metres with the thickness and<br />
area stated in the description;<br />
The treatment of the finished face of sprayed concrete shall be scheduled in<br />
square metres;<br />
Separate items shall be given where access is difficult.<br />
7.4 MEASUREMENT PROCEDURE<br />
7.4.1<br />
Clause6.3 and 6.4 shall apply except that beams, lintels, columns and piers sprayed<br />
integral with walls shall be measured with the walls and this shall be stated.<br />
7.4.2<br />
Ties, anchors and the like to existing work shall be described and enumerated.<br />
7.4.3<br />
External angles shall be measured.<br />
7.4.4<br />
Formwork to ends and reveals shall be measured.<br />
7- 1<br />
Copyright Standards New Zealand<br />
Provided by IHS under license with SNZ<br />
Document provided by IHS Licensee=<strong>Unitec</strong> Inst of Technology/5911177001,<br />
03/02/2005 18:31:52 MST Questions or comments about this message: please call<br />
the Document Policy Group at 303-397-2295.