NZ4202 - Unitec

More documents

Recommendations

Info

SNZ NZS*4202 95 8583369 0042Ybb 434 Issued June 1995 NZS 4202: 1 995 0.7 MEASUREMENT 0.8 0.7.1 All workshall be measured net, as fixed in place, exclusive of laps, corrugations, ribs and the like unless otherwise specified in this Standard Method of Measurement. 0.7.2 Items covering special protection, attendances, guarantees, samplesand tests shall be scheduled in each section. Reference shall be made to the applicable specification clauses. DESCRIPTION 0.8.1 In stating dimensions the order shall be consistent and generally in the sequence of length, width and height. Where that sequence is not appropriate or where ambiguity could arise the dimensions shall be specifically identified. 0.8.2 Appropriate sizes, dimensions, girths, thicknesses, mass and other relevant information necessary for the proper assessment of items shall be included in the descriptions including specific reference to drawing detail and/or specification clause numbers. 0.8.3 Patented or proprietary items shall be scheduled and the name of the manufacturer, catalogue reference, finish and other relevant information sufficient to identify the particular product given. 0.8.4 Descriptions of items or headings to groups of items shall contain reference to their general location in the works. 0.8.5 The forming of fair edges, ends, angles, mitres and junctions between straight and raking or curved work shall, unless stated otherwise herein, be held to be included with work in which they occur. 0.8.6 Notwithstanding the provisions of this document for extra values to be measured, such extra values may be included in the description of any item of work on which they occur and this shall be stated. 0.8.7 Circular work shall be measured separately. The term circular shall be deemed to include any form of curve. Work curved in two directions shall be measured separately. 0.8.8 Unlessothetwise specified, the removalof temporary worksand plant andsubsequent making good shall be deemed to be included in the item. 0.8.9 Alterations to existing buildings and other works shall be described separately and in the relevant sections of the schedule. --`,,``,,,,,,``,``,`,,,`,,,`,-`-`,,`,,`,`,,`--- Copyright Standards New Zealand Provided by IHS under license with SNZ Document provided by IHS Licensee=<strong>Unitec</strong> Inst of Technology/5911177001, 03/02/2005 18:31:52 MST Questions or comments about this message: please call the Document Policy Group at 303-397-2295. 0-3
~ ~~~ ~ SNZ NZSm4202 95 8583169 0042467 370 NZS 4202:1995 Issued June 1995 0.9 OTHER METHODS OF MEASUREMENT --`,,``,,,,,,``,``,`,,,`,,,`,-`-`,,`,,`,`,,`--- 0.9.1 This document acknowledges the possibility of measuring any identifiable section of the works under another method of measurement where such is clearly appropriate and this shall be stated and the method of measurement nominated. 0-4 Copyright Standards New Zealand Provided by IHS under license with SNZ Document provided by IHS Licensee=<strong>Unitec</strong> Inst of Technology/5911177001, 03/02/2005 18:31:52 MST Questions or comments about this message: please call the Document Policy Group at 303-397-2295.
Page 1 and 2: ~~ SNZ NZS*4282 95 8583169 0042459
Page 3 and 4: SNZ NZSu4202 95 9 A583169 0042463 9
Page 5 and 6: SNZ NZSr4202 95 = B583Lbî 0042463
Page 7: SNZ NZSx4202 95 8583Lbî 0042465 5T
Page 11 and 12: SNZ NZS*4202 95 = 8583167 0042469 1
Page 13 and 14: SNZ NZS*4202 95 W 8583169 0042473 8
Page 15 and 16: ~ SNZ NZSx4202 95 m 8583Lb9 0042473
Page 17 and 18: SNZ NZSa4202 95 m A583169 0042475 4
Page 19 and 20: ~ ___ SNZ NZS*4202 95 W 8583369 O04
Page 21 and 22: ~~~~ ~~ SNZ NZSa4202 95 m 8583369 0
Page 23 and 24: ~~ ~~ ~ SNZ NZS*4202 95 M 8583369 0
Page 25 and 26: ~ ~ ~~ SNZ NZS*4202 95 8583364 0042
Page 27 and 28: SNZ NZSti.1202 95 W 8583169 OOY2485
Page 29 and 30: SNZ NZSr4202 75 6 8583367 0042487 L
Page 31 and 32: SNZ NZS*4202 95 W 8583369 0042489 T
Page 33 and 34: SNZ NZS*4202 95 8583369 0042493 b9T
Page 35 and 36: SNZ NZS+4202 95 E B583Lb9 0042493 4
Page 37 and 38: SNZ NZS*4202 95 M 8583Lb9 0042495 2
Page 39 and 40: NZS 4202: 1 995 Issued June 1995 SE
Page 41 and 42: SNZ NZS*4202 95 m 8583369 0042499 9
Page 45 and 46: SNZ NZSm4202 95 = 8583Lb9 0042503 1
Page 47 and 48: SNZ NZS*4202 95 m 8583Lb9 0042505 T
Page 51 and 52: SNZ NZS*4202 95 8583169 0042509 b5T
Page 53 and 54: SNZ NZSx4202 95 W 8583369 0042533 2
Page 55 and 56: SNZ NZSx4202 95 m 8583369 0042533 0
Page 57 and 58: ~ SNZ NZS*4202 95 m 8583369 0042535
Page 59 and 60:
~~ SNZ NZS*4202 95 8583169 0042517
Page 61 and 62:
SNZ NZSx4202 95 M 85833b9 0042539 5
Page 63 and 64:
~~ ~ SNZ NZSo4202 95 = 8583369 0042
Page 65 and 66:
NZS 4202:1995 Issued June 1995 21.4
Page 67 and 68:
SNZ NZSa4202 95 B583l169 0042525 BT
Page 69 and 70:
SNZ NZS*4202 95 8583169 0042527 675
Page 71 and 72:
NZS 4202: 1 995 Issued June 1995 23
Page 73 and 74:
NZS 4202: 1 995 Issued June 1995 23
Page 75 and 76:
SNZ NZS*4202 95 H 8583169 0042533 9
Page 77 and 78:
NZS 4202: 1 995 Issued June 1995 25
Page 79 and 80:
~~~ ~~ SNZ NZS*:4202 95 m 8583369 0
Page 81 and 82:
~ ~ --`,,``,,,,,,``,``,`,,,`,,,`,-`
Page 83 and 84:
SNZ NZSw4202 95 m 85831b9 0042541,
Page 85 and 86:
SNZ NZS*4202 95 M 8583169 0042543
Page 87 and 88:
SNZ NZSx4202 95 85B3Lb9 0042545 b90
Page 89 and 90:
~ SNZ NZSr4202 95 W 8583Lbî 004254
Page 91 and 92:
SNZ NZSJ4202 95 E 8583169 0042549 2
Page 93 and 94:
~~ ~ SNZ NZS+4202 95 W 85B3369 0042
Page 95 and 96:
SNZ NZSS4202 95 W 8.583169 0042553
Page 97 and 98:
NZS 4282: 1 995 Issued June 1995 SE
Page 99 and 100:
~ ~~ SNZ NZSM4202 95 8583169 004255
Page 101 and 102:
SNZ NZS*4202 95 8583369 0042559 3õ
Page 103 and 104:
NZS 4202: 1 995 Issued June 1995 36
Page 105 and 106:
SNZ NZS>k4202 95 M 8583Lb9 00425b3
Page 107 and 108:
NZS 4202: 1 995 Issued June 1995 SE
Page 109 and 110:
Issued June 1995 NZS 4202: 1 995 Al
Page 111:
NZS 4202: 1995 --`,,``,,,,,,``,``,`
show all

NZ4202 - Unitec

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?