NZ4202 - Unitec

SNZ NZSx4202 95 M 85833b9 0042539 5T9 M
NZS 4202: 1995 Issued June 1995
19.4.4 Fittings
19.4.4.1
The description of cupboards, benches, counter fitments and the like shall state the
overall size and type of fittings with general details of number of doors, drawers, bins,
shelving etc.
19.4.4.2
Detailed quantities shall be measured stating components as follows:
19.4.5 Panei-work
Bearers, toeboards, framing and the like in metres;
Carcase, divisions and shelving in square metres, or metres with the widths
stated:
Clashing or edging strips in metres;
Doors, bins, drawers, including any special runners, and the like enumerated;
Special coverings and finishings shall be measured separately.
19.4.5.1
Framed panel-work and the like shall be measured in accordance with the principles
of section 17.
19.4.5.2
Circular, spandrel, or specially shaped framed panelling shall be measured separately.
19.4.5.3
Interior and exterior angles to framed panelling shall be measured in metres and the
number stated.
19.4.6 Veneers
Melamineveneered pressingsand the like, such as bench tops, shall be enumerated
giving the size, details of substrate and edge treatment including upstands, openings
and sinks bonded in.
19.4.7 Other joinery
Other joinery items not expressly included shall be measured and described in
accordance with principles of this section.
--`,,``,,,,,,``,``,`,,,`,,,`,-`-`,,`,,`,`,,`---
19-3
Copyright Standards New Zealand
Provided by IHS under license with SNZ
Document provided by IHS Licensee=Unitec Inst of Technology/5911177001,
03/02/2005 18:31:52 MST Questions or comments about this message: please call
the Document Policy Group at 303-397-2295.