NZ4202 - Unitec

~
SNZ NZSr4202 95 W 8583Lbî 0042547 463 =
NZS 4202: 1 995 Issued June 1995
29.4.7
Work not exceeding 300 mm in width and included in the area shall be measured in
metres as extra value and classified under the following groups:
(a)
(b)
Not exceeding 150 rnm in width;
Exceeding 150 mm but not exceeding 300 mm in width.
This shall apply to all narrow widths except those in plane surfaces caused by
openings and the like.
29.4.8
Deductions shall be made forall openings and obstructions having an areaof 0.5 m2
and over.
29.4.9
Work to isolated surfaces not exceeding 1 .O m* shall be measured separately.
29.4.10
Solid plaster applied mechanically shall be measured separately.
29.4.1 1
Arrises, drips, fair edges, junctions with other materials, nosings, rounded angles,
grooves, coves, chases and the like shall be measured in metres.
29.4.12
Enrichments, cornices, mouldings, sills, beads, sinkings and the like shall be
measured in metres stating the girth and size. Stop ends, mitres, returned ends and
the like shall be enumerated.
29.4.13
Plaster to treads, risers, strings, skirtings, upstands, channels and the like shall be
measured in metres stating the girth and size.
29.4.14
Plaster to circular, ornamental or modelled work shall be measured separately.
29.4.15
Letters, numerals, isolated enrichments and the like shall be enumerated.
29-2
--`,,``,,,,,,``,``,`,,,`,,,`,-`-`,,`,,`,`,,`---
Copyright Standards New Zealand
Provided by IHS under license with SNZ
Document provided by IHS Licensee=Unitec Inst of Technology/5911177001,
03/02/2005 18:31:52 MST Questions or comments about this message: please call
the Document Policy Group at 303-397-2295.