NZ4202 - Unitec
NZ4202 - Unitec
NZ4202 - Unitec
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
SNZ NZSm4202 95 = 8583Lb9 0042503 131 =<br />
NZS 4202: 1 995 Issued June 1995<br />
13.4.1 6<br />
Centring for openings shall be fully described and enumerated or total length of soffit<br />
measured in metres with the number of openings stated. Centring to be left in shall<br />
be measured separately.<br />
13.4.17<br />
Casings, piers and columns shall be measured in metres stating the overall size.<br />
13.4.18<br />
Set back, projecting courses and the like shall be measured in metres. Isolated, set<br />
back, projecting and pattern work shall be described and enumerated.<br />
13.4.19<br />
Where cavities are closed at openings, ends and the like, an item for closing same<br />
shall be measured in metres, and the material and method shall be described.<br />
13.4.20<br />
The forming or cutting of ducts, chases and the like shall be measured in metres and<br />
the size shall be stated.<br />
13.4.21<br />
Raking out for flashings shall be measured in metres; that for steppedflashings shall<br />
be measured separately.<br />
13.4.22<br />
Holes for pipes, conduits, electrical boxes and the like shall be enumerated, stating<br />
the thickness of the blockwork.<br />
13.4.23<br />
Ventilation blocks and the like shall be described and enumerated. The thickness of<br />
the wall into which they are built shall be stated.<br />
--`,,``,,,,,,``,``,`,,,`,,,`,-`-`,,`,,`,`,,`---<br />
13-3<br />
Copyright Standards New Zealand<br />
Provided by IHS under license with SNZ<br />
Document provided by IHS Licensee=<strong>Unitec</strong> Inst of Technology/5911177001,<br />
03/02/2005 18:31:52 MST Questions or comments about this message: please call<br />
the Document Policy Group at 303-397-2295.