Leica TPS1200 System Field Manual

Description of fieldsField Option Description Choicelist To manually or automatically calculatethe geometric ppm value.Manually The geometric ppm value is manuallycalculated.Automatically The geometric ppm value is automaticallycalculated. User input Sets scale at central meridian.Available when . User input Sets offset to central meridian.Available when . Output The ppm for the map projection. User input Sets the height above reference.Available when . OutputThe ppm above reference.Available when . Output The height ppm value calculated from theheight coordinates of the current TPSstation stored in the System RAM. If thisvalue cannot be calculated, then ----- isdisplayed and is also ignored in the calculationof the geometric ppm value.Available for Calc Scale: Automatically User input Sets the individual ppm.Available when . OutputThe geometric ppm is the sum of:, and.Next stepPAGE (F6) changes to the Refraction page.CONFIGURETPS Corrections,Refraction pageThe refraction correction is taken into account during the calculation of the heightdifference.Description of fieldsField Option Description On or Off Refraction correction is applied to measurements. User input Available if . Refractioncoefficient to be used for calculation.Config...\Instrument Settings... TPS1200+ 107