Leica TPS1200 System Field Manual

8.4.2 Point, Line and Area Code FilterFor each object, a code filter exists. The point, line and area code filters are independentfrom each other. The functionality is identical. For simplicity, the point codefilter is explained.Accessstep-by-stepStep Description1. Refer to "8.4.1 Sorting and Filters for Points, Lines and Areas" to accessMANAGE Sorts & Filters.2. MANAGE Sorts & Filters.3. CODES (F4) to access MANAGE Point Code Filter.MANAGEPoint Code FilterThis screen shows the point codes from the active job and codes currently used asfilter.CONT (F1)To close the screen and return to thescreen from where this screen wasaccessed.GROUP (F4)To activate and deactivate codegroups. Codes belonging to a deactivatedcode group are not displayed inMANAGE Code Filter.USE (F5)To activate and deactivate the filterfor the highlighted code.NONE (F6) or ALL (F6)To deactivate or activate all pointcodes.SHIFT SORT (F5)To define the order of the codes.Manage...\Data TPS1200+ 53