Leica TPS1200 System Field Manual

10.2 Combining Linework and CodingDescriptionCombining Linework and coding can only be configured if thematical point codes orif thematical point, line and area codes are available for selection. Thematical codingcan be done with or without codelists.Requirements • A display mask must be configured with:• a field for codes.• a choicelist for Linework.• The configuration of a field for code types in a display mask is required forworking with point, line and area codes without choicelist. Else the configurationof a field for code types is optional.• Configure in CONFIGURE Coding & Linework, Coding page• or .• or .• In CONFIGURE Coding & Linework Settings, Linework page define the flagsfor Linework.The Survey application program is used here to explain the combination of Lineworkand coding.Accessstep-by-stepStep Description1. Select Main Menu: Survey to access SURVEY Survey Begin.2. In SURVEY Survey Begin select a job.3. Select a configuration set.4. Select an reflector.5. CONT (F1) to access SURVEY Survey: Job Name.SURVEYSurvey: Job Name,Survey pageThis is what a display mask configured for Linework and coding looks like. The mostimportant keys are explained.ALL (F1)To measure and store distances andangles.STOP (F1)Available if and DIST (F2) was pressed. Stopsthe distance measurements. (F1)changes back to ALL.62 TPS1200+ Linework