Leica TPS1200 System Field Manual

24.6 Field to OfficeDescriptionSupported filesAccessWay of workingstep-by-stepThis is to transfer jobs, codelists and other System1200 related files on theCompactFlash Card with a standard and simple FTP server.FTP protocol is used to transfer between System1200, which runs SmartWorx andhas an internet device connected, and the ftp server. The zip/unzip functionality isincluded.The following list shows the support file extensions that will automatically move tothe corresponding directory after downloading.Supported file File extension DirectoryAlmanac file Almanac.sys DATA/GPSAntenna file from GPS1200 List.ant GPSApplication program files *.a* SYSTEMASCII files for import/export to/from job *.txt DATACoordinate system file from GPS1200 Trfset.dat DBXCSCS field files *.csc DATA/GPS/CSCSDXF files for import/export to/from job *.dxf DATAFirmware files *.fw SYSTEMFormat files *.frt CONVERTGeoid field files *.gem DATA/GPS/GEOIDGSI files *.gsi GSIGSM/Modem station list from GPS1200 *.fil GPSLanguage files *.s* SYSTEMLicence file *.key SYSTEMLogfiles created from applicationprograms*.logDATATPS configuration files *.xfg CONFIGSystem files System.ram SYSTEMCustom ASCII file(LEICA Geo Office Export)*.cstDATAComma seperated variables,text file format (ASCII)Internet interface should be configured and connected prior using this function.Refer to "22.6 GPRS / Internet Devices".Select Main Menu: Tools...\Field to Office.*.csvDATAStep Description1. Type in the IP address. IP address format IPv6, for example2001:0db8:85a3:08d3:1319:8a2e:0370:7334, is NOT supported.Tools... TPS1200+ 171