Leica TPS1200 System Field Manual

25.7.2 Real-Time StatusDescriptionAccessThis screen shows information related to real-time data. The name of the screenchanges depending on the configuration:Real-time rover configuration:STATUS Real-Time InputReal-time reference configuration with onereal-time device:STATUS Real-Time OutputReal-time reference configuration with tworeal-time devices: STATUS Real-Time Output 1and STATUS Real-Time Output 2For simplicity, the screen is named here as STATUS Real-Time. Differencesdepending on the configurations are outlined.Step Description1. Press USER to access TPS1200+ User Menu.2. Press STAT (F3) to access STATUS Status Menu.3. Select SmartStation...4. Select Real-Time Status.STATUSReal-Time,General pageCONT (F1)To exit STATUS Real-Time.DATA (F4)To view the data being received.Depending on , theshown data differ.REF2 (F5) and REF1 (F5)Available for with two real-time devicesconfigured. To change between thestatus information for both real-timedevices.Description of fieldsFieldDescription The received real-time data format message type. The number of satellites on L1 and L2 being used in thecurrent position solution. Available for SmartStation/ATX1230 GG when is configured in CONFIGURESatellite settings. The number of satellites on L1 and L2being used in the current position solution. The number of satellites on L1 and L2 being used in thecurrent position solution.182 TPS1200+ STATUS