Leica TPS1200 System Field Manual

Field • For , or with :The antenna height at the reference from the marker to theMRP.• For and or with The antenna height at the reference from the marker to thephase center.• For all other :----- is displayed because the data format does not includeinformation about the antenna height.DescriptionThe coordinates for the reference station which are transferreddepend on the active real-time data format.• For real-time messages which include antenna height andantenna type: Marker.• For real-time messages which do not include antennaInformation: Phase Centre of L1.Next stepCONT (F1) exits STATUS Real-Time.STATUSReal-Time InputDataThe following provides additional information on the satellite data received via realtimemessage. Information of those satellites is displayed, which are used on bothreference and rover.AccessDATA (F4) on STATUS Real-Time, General page.CONT (F1)To return to STATUS Real-Time.SAT- (F2)To display information about thesatellite with the next smaller PRN.SAT+ (F3)To display information about thesatellite with the next larger PRN.Description of fieldsThe data being received from the satellites and the layout of the screen depend onthe active real-time data format.STATUS TPS1200+ 185