Leica TPS1200 System Field Manual

18 Config...\Instrument Settings...18.1 EDM & ATR SettingsDescriptionThe settings on this screen define the active EDM Electronic Distance Measurementand ATR Automatic Target Recognition settings.Descriptions apply in general to TPS1200+ instruments. Available options dependon the purchased model, for example with or without ATR.AccessCONFIGUREEDM & ATRSettingsSurvey pageSetup pageSelect Main Menu: Config...\Instrument Settings...\EDM & ATR Settings.Description• This screen has two pages - the Survey page and the Setup page.• The Survey page and Setup page contain identical fields.• The settings made in the Survey page are used by all applications and all measurementstaken outside of the Setup application program.• The settings made in the Setup page are only used inside the Setup applicationprogram.• Any changes made to the EDM & ATR Settings (e.g. via Icons, Quick Set,Hotkeys) while the Setup application program is active, only affect the SetupEDM & ATR settings.• Any changes made to the EDM & ATR Settings (e.g. via Icons, Quick Set,Hotkeys) while the Setup application program is not active, only affect theSurvey EDM & ATR settings.• When entering the Setup application program, the Setup EDM & ATR Settingsare active.• When leaving the Setup application program, the Survey EDM & ATR Settingsare active.• Both Survey and Setup EDM & ATR Settings are part of the configuration sets.DiagramCONT (F1)To accept changes and return toTPS1200+ Main Menu.TEST (F4)To access the CONFIGURE EDMTest Signal/Frequency screen.Config...\Instrument Settings... TPS1200+ 99