Leica TPS1200 System Field Manual

RCS • RCS settings are displayed.• Touch screen: Tapping the icon leads to CONFIGURE Interfaces.IconDescriptionThe RCS is turned o n.The RCS is turned on and is receiving messages.Bluetooth • The status of the Bluetooth port and any Bluetooth connection is displayed.• Touch screen: Tapping the icon leads to STATUS Bluetooth.IconDescriptionThe Instrument is Bluetooth capable.(The instrument must have a Communication side cover)The Bluetooth connection on Port 3 is established and is readyto be used.The Bluetooth connection on Port 3 is established, active andis communicating data.Line/area • The number of lines and areas currently open in the active job is displayed.• Touch screen: Tapping the icon leads to MANAGE Data: Job Name.IconDescriptionThe number of lines and areas which are currently open in theactive job is shown.CompactFlashcard/internalmemory• The status of the CompactFlash card and internal memory are displayed.• For the CompactFlash card, the capacity of used space is shown in seven levels.• For the internal memory, the capacity of used memory is shown in nine levels.• Touch screen: Tapping the icon leads to STATUS Battery & Memory.IconDescriptionThe CompactFlash card is inserted and can be removed.The CompactFlash card is inserted and cannot be removed.It is strongly recommended not to remove the CompactFlashcard to avoid loss of data.The internal memory is the active memory device.No iconThe CompactFlash card is the active memory device. NoCompactFlash card is inserted.User Interface TPS1200+ 13