Leica TPS1200 System Field Manual

25.7 STATUS SmartStation...25.7.1 Satellite StatusDescriptionAccessThis screen shows information related to the satellites ordered by the elevationangle.Step Description1. Press USER to access TPS1200+ Main Menu.2. Press STAT (F3) to access STATUS Status Menu.3. Select SmartStation...4. Select Satellite Status.STATUSSatellites,Rover page• The information about the satellites at the reference shown on the Referencepage is identical with the information shown on STATUS Satellites, Rover page• Satellites below the configured in CONFIGURE SatelliteSettings are shown in grey.CONT (F1)To exit STATUS Satellites.GPS X / GPS (F2)To hide or show the GPS satellites(shown by the prefix G). Available forGX1230 GG/ATX1230 GG when isconfigured in CONFIGURE SatelliteSettings.GLO X / GLO (F3)To hide or show the GLONASS satellites(shown by the prefix R).Available for GX1230 GG/ATX1230 GG when is configured inCONFIGURE Satellite Settings.HELTH (F4)To view the numbers of satellitescategorised in good, bad and unavailable.Description of columnsColumnSatElevDescriptionThe Pseudo Random Noise number (GPS) or the slot number(GLONASS) of the satellites.The elevation angle in degrees. The arrow indicates if a satelliteis rising or falling.180 TPS1200+ STATUS