Leica TPS1200 System Field Manual

15.2 Importing ASCII/GSI DataRequirements • For ASCII files:• At least one ASCII file with any file extension is stored in the \DATA directoryof the CompactFlash card.• For GSI files:• At least one ASCII file in GSI format with the file extension *.gsi is stored inthe \GSI directory of the CompactFlash card.AccessIMPORTImport ASCII/GSIData to JobRefer to "15.1 Overview" to access Import ASCII/GSI Data to Job.CONT (F1)To import the data.CONF (F2)For : To selectthe delimiter, the positions of theparticular variables and, if required,the number of lines used to describeeach point or if the variables aredelimited by one or multi spaces.For : Coordinatescan be switched for "lefthanded" coordinate systems. AllWI 81 data, normally Easting, is thenimported as Northing and all WI 82data, normally Northing, is thenimported as Easting.VIEW (F3)To display the data in .SHIFT HTS (F2)To define the height type for theimported data and if the Eastingshould be multiplied by -1. This isrequired by some coordinatesystems.Description of fieldsField Option Description Choicelist ASCII/GSI Data can be imported to a job,from the CompactFlash Card or Internalmemory. Choicelist The type of data to be imported. Choicelist For all files in the\DATA directory on the CompactFlashcard can be selected.For all files in the\GSI directory on the CompactFlash cardcan be selected.86 TPS1200+ Convert...\Import Data to Job